Zach Lee from Brand New Church in Harrison, Arkansas brings us this amazing set design…accomplished on $400.
To create this set they started with the 8’x8′ round white spheres made from cut out strips of 1/4″ luan. They used electrical tape to make them long enough and allow them to bend. The spheres were supported with broom sticks. Then they tied light rope to the spheres and hoisted them dynamically across the front of the stage. Each sphere costs them about $12 dollars.
Then they added painted trees to create the natural look. Zach cut down little scrub trees and spray painted then with 10 gallons of white paint. He put them on some elevated stages to create a height break, and used traditional par cans to light them. Most of the paint was donated by their local Sherwin Williams.
The thing that brought it all together was the use of the trusses. Amazing stage on an amazing budget!
Email urbanrevivaldesign@gmail.com if you want more details.
Very cool! I dig the creativity in this setup.
this is a testament to volunteers that kick it for the cause of Christ! So proud of @brandnewchurch.com
thanks Jonathan for your creativity and inspiration!!
thanks man, great website!
very very very noice~
This is a great stage design, was this for a Christmas service or a sermon series? It's great because it incorporates so many lights/technology, but with the trees it still looks natural. Awesome blend.
Fabulous !! I am always doing Church decorating and stage stuff/ budget, budget budget, we all know. And this one is amazing…. your talet and inspiration are a gift from God.
So, the spheres are stunning. Is there a way to post a little more info into how they were constructed? I have been trying to decipher it from the pictures and the short description in the post. These are an amazing way to fill the “top space” that always is difficult to fill.
This is super awesome. What type of trees are they?!
I am loving the sphere and I would love to include it in our church as well…. any help on the step by step procedure of making one?
Be blessed!
Beautiful..just a quick question…on the trees…how did you make them stand upright and sturdy? Thank you!
Thanks. Very Nice effects. We are going to attempt to use this in our church christmas carol event this year down here in Australia (it’s hot here!). Quick questions though – How did you attach the centre dowel to the ball rings? How did you fix the horizontal centre ring to all the other rings? I can’t figure it out from the photos or the instructions and I’m scared of splitting the luaun ply. Any help would be appreciated. P.S. I am also documenting our construction stages to post and help everyone else out once we get it finished and working.
Darren,
Did you ever get it documented or figure out the details?
Could use more detailed assembly. how were the strips connected together in making a circle of the and how wide did you cut them.
Did you use a single rope to hange then and was there any spining?
thanks for any help you can give me.
Phil
Hi- we made these for our church this xmas and they were very tough to make. we cut the strips an inch and a half thick and we used tape to attach the strips. turns out we could hve used a glue gun to attach them :) We put hooks on both ends of the balls and attached with super thin wire and they did not spin!!
Hopefully this helps- good luck to you!
Congratulations …
Incredible white spheres … I would like to do. How do I?
Which material used for the strips of the sphere?
Thank you and God bless.
Julio