Other Stuff

What are Stage Flats?

In this article, Glendale Matias talks about using and building stage flats in your stage design. What are stage flats, how do you build them, and should you use broadway or hollywood flats?

In stage design, designers work to create a visually stimulating environment. Using the elements and principles of design, they create context that ultimately transforms the space on the stage. There are numerous tools a designer can use to achieve this including building dimensional props, controlling light fixtures, draping cloth—but the most common method is constructing stage flats (short for scenery flats).

Flats are a great tool for any stage design. You can create a great deal of depth and visual interest using a small amount of material while occupying minimal stage space. They are very versatile, can be reused many times, relatively lightweight, mobile and can be easily stored. There are two styles of stage flats: Hollywood (TV, Hard flats) and Broadway (Soft).

What are Broadway Flats?

Broadway flats are much lighter. They’re constructed using muslin or canvas stretched on a thin wooden frame. They can be suspended from a fly tower for presentation or storage.

What are Hollywood Flats?

Hollywood flats, on the other hand, are constructed more rigidly using luan or plywood with wider stiles (or side bars). They can stand freely from the ground using wall jacks or can be anchored directly to a movable base or stage. These are heavier and require more lumber, but can support windows and other rigid detailing. Both have their advantages and disadvantages, but overall, the structure and concept are the same.

How do I build a stage flat?

Flat construction consists of a wooden frame, a frame skin (surface usually wood or cloth) and a frame stand. Here is some terminology:
what-are-stage-flats

  • Rails – The top and bottoms of the flat. Usual size is 4¹ in length.
  • Stiles – The sides of the flat. The length of the stile is the height of the flat (usually 8¹, 10¹, 12¹).
  • Toggles – These are crosspieces that run between the stiles. They provide strength and rigidity and keep the flat square.
  • Corner blocks – Corner blocks are used to attach the rails and stiles. They also keep the flat square. They’re usually made of plywood/masonite squares (triangles also keep the flat square).
  • Keystones – Keystones join the stiles and toggles together. They’re usually rectangle or ‘keystone’ in shape.
  • Skin – Plywood, luan, canvas, muslin, or butcher paper.
  • Base/Wall Jacks (for free standing flats) – A support that keeps the flat braced and standing. They can be right triangle frames that connects to both stiles and anchored or weighted down.

Flats are a great method for creating context for the stage. They are extremely versatile for almost anything requiring a backdrop or visual presentation. Due to their incredible mobility, a stage can be easily transformed between scenes or events by simply rearranging the flats. Stage flats can be stored flat and reused, which helps to reduce costs.

I use stage flats for anything that needs to convey information. They are the quickest way to deploy and execute. In combination with an opaque projector (or LED projector) a design can be quickly sketched, painted and assembled.

 

Glendale is a graphic designer at Disney and does stage and scenic design for his church in Los Angeles, Oasis Church.

Flowing Paper Stage Design Smooth on Rough

4 responses to “What are Stage Flats?”

  1. Val says:

    Our stage flats are invaluable to us! They are 2×4 frames, covered with canvas. A local welder made us rolling stands that the 4′ x 8′ sections slip into for super adaptable staging, scene changes and maneuverability that can be easily handled by one crew member. They’re also still lightweight enough to be hung from our trussing and store in a closet when not in use. Win, win, win!

    • Tracie Bonnick says:

      Would you be willing to share how you made your stage flats with the rolling stands?

      • Val says:

        Hi, Tracie – so sorry for the delay in responding but Christmas production frenzy was on us. :) Our stage flats are just as Glendale describes above but to get them to fit into the rolling stands, we leave off the bottom corner blocks. The canvas does need to be stretched and cornered very carefully to fit into the stand smoothly but that’s not difficult to do.

        It’s probably easier to show you the design than for me to try to describe them but I’m not seeing a photo option in the comments here, so I’ll do my best.

        The rolling stands are a metal stock that has roughly the same dimensions as a 2×4 but are hollow. This stock was welded into a big capital letter “I” (think Times New Roman upper case I) for the base, approximately 4′ 4″ long with the top and bottom of the I being about 12″ long. Industrial pivoting casters were installed on each end of the top and bottom to form the rolling base. Then a 10-12″ section was welded standing up from the intersection of the base pieces with metal tabs welded onto the long section of the base and the upright sections to form guides and braces for the flats. Then we painted them black and voila! The flats slide in from the top and become free standing, reversible and mobile.

        They do end up with a small gap between them but for staging that’s never really been a problem. For stationary sets, we hang black paper or fabric between so that no motion is visible behind them. We also drilled holes so they could be locked together if necessary, but for most of our sets we want smaller, more mobile pieces.

        If that wasn’t clear enough, and you’d like to see some photos, feel free to contact me at val (at) valeriecoulman (dot) com, and I’d be happy to send some to you. Happy New Year!

  2. Jephrey says:

    What does Construction on edge mean?

Leave a Reply to Jephrey Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.